top of page

Praise and Worship Team

Public·30 members

Download Driver Topcon Gts-235n

How to Download Driver for Topcon GTS-235N Total Station

The Topcon GTS-235N is a total station that can measure angles, distances, and coordinates with high accuracy. It can also store data and communicate with other devices via USB, Bluetooth, or RS-232C ports. To use the GTS-235N with a computer, you need to install the appropriate driver software that can recognize the device and enable data transfer.


In this article, we will show you how to download and install the driver for the Topcon GTS-235N total station on your Windows PC. We will also provide some tips on how to troubleshoot common issues that may arise during the installation process.

Step 1: Download the Driver from the Topcon Website

The first step is to download the driver software from the official website of Topcon Positioning Systems, Inc. You can access the website by clicking [here]. On the website, you will see a list of utility software for various Topcon products. Scroll down and find the section for "Topcon Receiver Utility". This is the software that you need to install the driver for the GTS-235N.

Click on the link that says "Download [40,186KB]". This will start downloading a ZIP file named "". Save the file to a location where you can easily find it later. You can also download the manual and release notes for the software by clicking on the respective links below the download link.

Step 2: Extract and Run the Installer

The next step is to extract the contents of the ZIP file that you downloaded in the previous step. To do this, you need a program that can unzip compressed files, such as WinZip or 7-Zip. Right-click on the ZIP file and select "Extract All" or "Extract Here" depending on your program. This will create a folder named "TRU_2.9" that contains several files and subfolders.

Open the folder and double-click on the file named "setup.exe". This will launch the installer for the Topcon Receiver Utility software. Follow the instructions on the screen to complete the installation process. You may need to accept some terms and conditions and choose a destination folder for the software.

Step 3: Connect the GTS-235N to Your PC

The final step is to connect your GTS-235N total station to your PC using a USB cable. Make sure that both devices are turned on and that you have a stable power supply. Plug one end of the USB cable into the USB port of your GTS-235N and the other end into an available USB port of your PC.

Once you connect the devices, your PC should automatically detect and install the driver for your GTS-235N. You can check if this is successful by opening the Control Panel and clicking on Devices and Printers. You should see an icon for your GTS-235N under Unspecified devices. If you see a yellow exclamation mark or a red cross next to it, it means that there is a problem with the driver installation.

Troubleshooting Tips

If you encounter any issues during or after installing the driver for your GTS-235N, here are some tips that may help you resolve them:

  • Make sure that you have downloaded and installed the correct version of the driver software for your operating system (32-bit or 64-bit).

  • Make sure that you have extracted all the files from the ZIP file before running the installer.

  • Make sure that you have administrator privileges on your PC when installing or updating the driver software.

  • Make sure that you have connected your GTS-235N to your PC using a compatible USB cable.

  • Make sure that you have selected the correct communication port (USB) in your GTS-235N settings.

If you still see an error message or a warning sign next to your GTS-235N icon in Devices and Printers, try updating or reinstalling the driver manually by following these steps:

  • Right-click on your GTS-235N icon and select Properties.

  • Click on the Hardware tab and then click on Properties again.

  • Click on the General tab and then click on Change settings.

  • Click on the Driver tab and then click on Update Driver.

  • Click on Browse my computer for driver software.

  • Browse to the location where you extracted the driver software and select the appropriate folder (32-bit or 64-bit).

  • Click Next and follow the instructions to complete the driver update or installation.

  • If none of the above tips work, you may need to contact Topcon customer support for further assistance. You can find their contact details [here].


In this article, we have shown you how to download and install the driver for the Topcon GTS-235N total station on your Windows PC. We hope that this guide has been helpful and that you can now use your GTS-235N with your PC without any problems. If you have any questions or feedback, please feel free to leave a comment below.


Welcome to the group! You can connect with other members, ge...


  • thefellowshipplace
  • Real Crackers
    Real Crackers
  • Activated Soft
    Activated Soft
  • Felix Miller
    Felix Miller
  • Виталий Филипов
    Виталий Филипов
Group Page: Groups_SingleGroup
bottom of page